2506 Haze Free
2506 effectively lifts haze and imbedded ink from the mesh, then emulsifies and dissolves the ink constituents; resins, binders, pigments, plastizers, etc. 2506 is an excellent degreaser, as it also removes dirt, residues and sizings. 2506 is versatile in its application.
*Note: Actual product not shown.
Aggressive formulation to remove all types of stubborn plastisol ink, as well as non-PVC printing ink (haze and ghost images) that remains on textile screens following emulsion removal. 2506 effectively lifts haze and imbedded ink from the mesh, then emulsifies and dissolves the ink constituents; resins, binders, pigments, plastizers, etc. The solution suspends these constituents so reattachment to the mesh surface is prohibited, thus allowing for water-rinse removal. 2506 is an excellent degreaser, as it also removes dirt, residues, and sizings. 2506 is versatile in its applications. It can be applied via brush or spray.
-Completely & efficiently removes all haze images from screen in as little as 10 minutes.
-Meets SARA III Requirements
-Low Vapor Pressure: 4.49mm Hg @ 20C
-Low Evaporation Rate
Apply 2506 with brush or scrub pad directly to both sides of screen, starting from the center and working to the sides in a circular fashion. Let stand for 10 minutes. To eliminate image, remove with high-pressure water spray starting from the bottom of screen moving in a slow side to side motion up to top of screen.
Consult SDS for Safety and Handling Information.
1 Qt, 1 Gal, 5 Gal, 30 Gal, 4 Gal, 55 Gal